Retired

Sillhouette Pendant
Sillhouette Pendant

Level

Intermediate

Session

4 hours

Description

Learn how to use a stone to enhance your pierced designs. In this project will use a stunning Kyanite stone to “backlight” your creations. Students will have the opportunity to choose their own designs or use one that is provided.
Tools
Tools required to complete project.
- Planishing Hammer – Rounded Raising Hammer
  – Classes requiring these hammers are utilizing the “blade” end for forming the metal on a wood forming block. Either of one of these hammers will work.
- Bench Block
  Steel or Anodized aluminum - Used as a hammering surface for metal stamping or working with metal.
- Bezel Shears
  Used to cut metal sheet. There are many available on the market, any of which will work, however they should NOT be serrated. (Tin snips or airplane shears will also work, however, they may be large and cumbersome.) If the project has curves in the design and you own a pair, bring curved bezel shears. This is an optional item for most classes. Shears will be provided for use during classes.
- Chasing Hammer
  Used for chasing/moving metal. In my classes chasing hammers are used to create hammer marks on metal and riveting. Instructor will provide for every class needed.
- Hand Tools
  
  Basic hand tools – Any quality is appropriate for my classes. These do not need to be high end or expense.
  
  Round nose - Typically it is preferred that the round nose be a fine tip. Especially for classes with detailed wire work.
  
  Chain/needle nose – Tapered jaws for general metal and wire work. Non-serrated are requested for all of my classes. Typically requested for classes to be used for opening and closing jump rings; in which case, 2 pairs are requested or a combination of chain nose and flat nose is suitable.
  
  Flat nose – Similar to chain nose but the jaws are not tapered. Non-serrated are requested for all of my classes.
- Magnifier or Optivisor
  – For almost all classes this is listed as an “As Needed” tool. If you have sight challenges it is recommended that you are properly prepared. For advance stone setting classes this is required! If you decide to use reading glasses consider better than 2.5x.
- Needle File Set
  Used for filing smaller pieces of metal and tight places. When required, either diamond coated or fine tooth is preferred. Some students may prefer to use smaller files as opposed to the student files for their projects.
- Nylon nose pliers
  Flat nose pliers with PVC grips o the heads. Mostly used for straightening wire. In my classes they are used to prevent marring when bending metal. Only required for some classes, but this is mostly an optional item.
- Ott Light or Task Lamp
  This is optional item that is listed for every class. It is up to you to determine whether or not you will need to have one depending on your vision.
- Metal Ruler
  6" metal ruler is preferred unless otherwise noted. A larger one will also work, however, it may be a little cumbersome.
- Side Cutters
  Also known as wire cutters or snippers. For many of my classes I prefer Ultra Flush side cutters because it eases the workload. Ultra flush is the most flush you can buy as opposed to just flush cutters. If you don't own a pair of Ultra Flush cutters, you may want to invest in a good pair either Lindstrom or Swanstrom. There is usually not a different in price between ultra and just flush cutters so why not just buy the best? The image shows just a side cutter (top) and ultra flush (bottom).
- Soldering Kit
  
  (Optional)
  Items in this Soldering Kit will be provided for use during the class. If you are interested in ordering a kit please click on the image. Kit includes: Butane torch, butane, 1 tube solder paste, fire tweezers, copper tweezers, Sparex, tripod with mesh, flux, soldering board. (Note: kit will be delivered at class. If you require the kit prior to class please contact us to make arrangements.
- Student Files
  Standard size is 2/o. For filing metal. . Instructor will provide to share for every class needed.
- Wood forming block
  Used for shaping metal.
Silver H2Oh!
Silver H2Oh!

Level

Beginner

Session

3 hours

Description

Create nature-inspired pieces for one-of-a-kind pendants, rings, earrings and more! This free-form technique is fun, easy and foolproof. No piece could ever be wrong! In addition to completing the pendant shown, students will have the opportunity to make several pieces that may be used after the class. Students will finish the project in class.
Tools
Some tools will be provided by the instructor. Please refer to your registration.
- Cut Lube
  Used to lubricate saw blades and drill bits for ease of cutting.
- Hand Tools
  
  Basic hand tools – Any quality is appropriate for my classes. These do not need to be high end or expense.
  
  Round nose - Typically it is preferred that the round nose be a fine tip. Especially for classes with detailed wire work.
  
  Chain/needle nose – Tapered jaws for general metal and wire work. Non-serrated are requested for all of my classes. Typically requested for classes to be used for opening and closing jump rings; in which case, 2 pairs are requested or a combination of chain nose and flat nose is suitable.
  
  Flat nose – Similar to chain nose but the jaws are not tapered. Non-serrated are requested for all of my classes.
- Helping Hand/Third Hand
  Used to hold small parts in place while soldering. Instructor will provide to share for every class needed.
- Jeweler’s Saw
  Used for cutting sheet metal and metal tubes. Instructor will provide for every class needed.
- Magnifier or Optivisor
  – For almost all classes this is listed as an “As Needed” tool. If you have sight challenges it is recommended that you are properly prepared. For advance stone setting classes this is required! If you decide to use reading glasses consider better than 2.5x.
- Ott Light or Task Lamp
  This is optional item that is listed for every class. It is up to you to determine whether or not you will need to have one depending on your vision.
- Propane Torch
  This torch may be purchased at a hardware store.
- Safety Glasses
  Protective Eye wear – All drilling classes require that you wear some sort of safety glasses. Will your eyeglasses be enough? This is a personal decision. Some students prefer to wear only their prescription glasses while others wear goggles over their glasses. These may be found in any hardware store.
- Side Cutters
  Also known as wire cutters or snippers. For many of my classes I prefer Ultra Flush side cutters because it eases the workload. Ultra flush is the most flush you can buy as opposed to just flush cutters. If you don't own a pair of Ultra Flush cutters, you may want to invest in a good pair either Lindstrom or Swanstrom. There is usually not a different in price between ultra and just flush cutters so why not just buy the best? The image shows just a side cutter (top) and ultra flush (bottom).
- Soldering Kit
  
  (Optional)
  Items in this Soldering Kit will be provided for use during the class. If you are interested in ordering a kit please click on the image. Kit includes: Butane torch, butane, 1 tube solder paste, fire tweezers, copper tweezers, Sparex, tripod with mesh, flux, soldering board. (Note: kit will be delivered at class. If you require the kit prior to class please contact us to make arrangements.
- Student Files
  Standard size is 2/o. For filing metal. . Instructor will provide to share for every class needed.
- Tube Cutting Pliers
  A great gadget to aid in cutting tubes. These pliers create even leverage on the tube for sawing. Provided for all classes with tubes.
- Whip and Crucible
  Used to melt metal. Instructor will provide for every class needed. If you are interested in purchasing a Casting kit (whip, crucible and boric acid) please contact instructor directly.
Silver Linings

Silver Linings

Level

Intermediate

Session

6 hours, all day

Description

Textures are a great way to add a distinct design element to a piece. However, textured sterling silver sheet can be extremely cost-prohibitive. In this class we will cut the cost and texturize our own silver. Cut, shape, solder, polish and voila! You can use the pieces for a necklace, bracelet or earrings.
Simplicity Earring

Simplicity Earrings

Level

Beginner

Session

2.5 hours

Description

Lets start using a little gold, gold-filled that is. In this class we will make an elegant pair of earrings combining sterling silver components to gold filled wire.
So Charming

So Charming

Level

Beginner

Session

3 hours

Description

Hand stamped charms are all the rage, why not take a little bit further with a little solder? Learn proper techniques to hand stamping metal and soldering sterling silver. Students who work quickly will finish multiple projects. Additional materials and tools maybe purchased from instructor.

Tools
Some tools will be provided by the instructor. Please refer to your registration.
Stately Toggles

Stately Toggles

Level

Intermediate

Session

6 hours, all day

Description

Make a statement by creating a “Bold Connection” to complete your beadwork. Pieces may be used to finish necklaces or bracelets. In this class, students will learn different ways to texturize metal, refine their soldering skills, and shape and forge wire to create a toggle.
Students will finish the toggle, however, they may not have time to string their beaded necklace. (Semi-precious beads will be provided for the project. Stones will vary in size, shape and stone.) Pre-requisite: Must have soldering experience. Beading will not be covered in this class.
If a rolling mill is provided, the tools list will be revised.

Tools
Some tools will be provided by the instructor. Please refer to your registration.
The Great Divide

The Great Divide

Level

Intermediate

Session

3 hours

Description

In this two part class, you will learn how to enamel on silver to make your transparents glow. In part two we will put your pieces together by soldering to sterling silver.
This and That
This and That Bracelet

Level

Intermediate

Session

2, 1.5 hours, on-line

Description

This class will cover a little bit of this and a little of that. Soldering, riveting, fusing, reticulating, wire wrapping and YES! even a little stone setting. Every link is a miniature project in itself and can be created to your style. Participants will receive a collection of different materials to make one of a kind bracelets. Even if we were all sitting together in a room, no two bracelets will look alike. Lets get back to making and show off your finished bracelets at the next event! Classses are conducted on-line. Written instructions and detailed materials list will be provided before the commencement of class.
Tools
Some tools will be provided by the instructor. Please refer to your registration.
- Bench Block
  Steel or Anodized aluminum - Used as a hammering surface for metal stamping or working with metal.
- Bezel Mandrel
  A small steel mandrel used to create round bezel settings, jump rings or other components.
- Bezel Pusher
  Not a tool I usually use, but from time to time they are helpful. Before using, consider sanding the edges of the tool to create a bevelled edge to reduce marring and scratches.
- Bezel Shears
  Used to cut metal sheet. There are many available on the market, any of which will work, however they should NOT be serrated. (Tin snips or airplane shears will also work, however, they may be large and cumbersome.) If the project has curves in the design and you own a pair, bring curved bezel shears. This is an optional item for most classes. Shears will be provided for use during classes.
- Center punch
  Used to create a dimple in metal to start a hole for drilling. Also used for riveting. Provided by instructor for all classes
- Chasing Hammer
  Used for chasing/moving metal. In my classes chasing hammers are used to create hammer marks on metal and riveting. Instructor will provide for every class needed.
- Fine Tweezers
  Used for moving small parts. Classes requiring fine tweezers will not work with fire tweezers. These are a cheap investment. Please be bring some. Optional for most classes.
- Flex shaft
  Rotary tool used for polishing, drilling, finishing, etc. Flex shafts are available for purchase new and gently used at the class. Pleased contact the instructor if are interested in purchasing one at the class as quantities are limited.
- Hand Tools
  
  Basic hand tools – Any quality is appropriate for my classes. These do not need to be high end or expense.
  
  Round nose - Typically it is preferred that the round nose be a fine tip. Especially for classes with detailed wire work.
  
  Chain/needle nose – Tapered jaws for general metal and wire work. Non-serrated are requested for all of my classes. Typically requested for classes to be used for opening and closing jump rings; in which case, 2 pairs are requested or a combination of chain nose and flat nose is suitable.
  
  Flat nose – Similar to chain nose but the jaws are not tapered. Non-serrated are requested for all of my classes.
- Heavy Duty Cutters
  Although any heavy duty cutter will work, if they are flush, they will make your work a lot easier. Cutter should be able to cut through 10g wire. (Many cutters imprint their cutting capacity on the inside of the handle.) Keiba and Xuron are recommended.
- Magnifier or Optivisor
  – For almost all classes this is listed as an “As Needed” tool. If you have sight challenges it is recommended that you are properly prepared. For advance stone setting classes this is required! If you decide to use reading glasses consider better than 2.5x.
- Muslin buffing wheels
  Used with a flex shaft or Dremel to polish metal.
- Needle File Set
  Used for filing smaller pieces of metal and tight places. When required, either diamond coated or fine tooth is preferred. Some students may prefer to use smaller files as opposed to the student files for their projects.
- Ott Light or Task Lamp
  This is optional item that is listed for every class. It is up to you to determine whether or not you will need to have one depending on your vision.
- Rawhide/Leather Mallet
  Shape and flatten metal without marring it. #2 mallet is a standard size. Instructor will provide for every class needed. A yellow nylon mallet may be used in its place, however a rubberone may not.
- Ring Mandrel, Steel
  Used for shaping and forming metal into rings. A plastic one will not work in its place. Instructor will provide to share (1 for every 2 people) for every class needed.
- Ring Sizer
  Optional, used to measure your ring size. Several sets will be provided to share in class.
- Riveting Hammer
  (aka Swiss Hammer) – Best hammer for riveting due to its small size. Instructor will provide for every class needed.
- Side Cutters
  Also known as wire cutters or snippers. For many of my classes I prefer Ultra Flush side cutters because it eases the workload. Ultra flush is the most flush you can buy as opposed to just flush cutters. If you don't own a pair of Ultra Flush cutters, you may want to invest in a good pair either Lindstrom or Swanstrom. There is usually not a different in price between ultra and just flush cutters so why not just buy the best? The image shows just a side cutter (top) and ultra flush (bottom).
- Soldering Kit
  
  (Optional)
  Items in this Soldering Kit will be provided for use during the class. If you are interested in ordering a kit please click on the image. Kit includes: Butane torch, butane, 1 tube solder paste, fire tweezers, copper tweezers, Sparex, tripod with mesh, flux, soldering board. (Note: kit will be delivered at class. If you require the kit prior to class please contact us to make arrangements.
Woven Bracelet
Woven Bracelet

Level

Intermediate

Sessions

6 hours, all day

Descrption

Turn silver and copper into a woven design to be used as the base of a bracelet. Learn how to shape and solder silver for a bracelet frame. And through a series of soldering steps to create stability for the weave.
Tools
Some tools will be provided by the instructor. Please refer to your registration.
- Bench Block
  Steel or Anodized aluminum - Used as a hammering surface for metal stamping or working with metal.
- Oval Bracelet Mandrel, Steel
  For shaping and form metal into a bracelet shape. 2 will be provided to share for all classes. So if you have one, bring it.
- Flex shaft
  Rotary tool used for polishing, drilling, finishing, etc. Flex shafts are available for purchase new and gently used at the class. Pleased contact the instructor if are interested in purchasing one at the class as quantities are limited.
- Hand Tools
  
  Basic hand tools – Any quality is appropriate for my classes. These do not need to be high end or expense.
  
  Round nose - Typically it is preferred that the round nose be a fine tip. Especially for classes with detailed wire work.
  
  Chain/needle nose – Tapered jaws for general metal and wire work. Non-serrated are requested for all of my classes. Typically requested for classes to be used for opening and closing jump rings; in which case, 2 pairs are requested or a combination of chain nose and flat nose is suitable.
  
  Flat nose – Similar to chain nose but the jaws are not tapered. Non-serrated are requested for all of my classes.
- Helping Hand/Third Hand
  Used to hold small parts in place while soldering. Instructor will provide to share for every class needed.
- Magnifier or Optivisor
  – For almost all classes this is listed as an “As Needed” tool. If you have sight challenges it is recommended that you are properly prepared. For advance stone setting classes this is required! If you decide to use reading glasses consider better than 2.5x.
- Muslin buffing wheels
  Used with a flex shaft or Dremel to polish metal.
- Ott Light or Task Lamp
  This is optional item that is listed for every class. It is up to you to determine whether or not you will need to have one depending on your vision.
- Rawhide/Leather Mallet
  Shape and flatten metal without marring it. #2 mallet is a standard size. Instructor will provide for every class needed. A yellow nylon mallet may be used in its place, however a rubberone may not.
- Metal Ruler
  6" metal ruler is preferred unless otherwise noted. A larger one will also work, however, it may be a little cumbersome.
- Side Cutters
  Also known as wire cutters or snippers. For many of my classes I prefer Ultra Flush side cutters because it eases the workload. Ultra flush is the most flush you can buy as opposed to just flush cutters. If you don't own a pair of Ultra Flush cutters, you may want to invest in a good pair either Lindstrom or Swanstrom. There is usually not a different in price between ultra and just flush cutters so why not just buy the best? The image shows just a side cutter (top) and ultra flush (bottom).
- Soldering Kit
  
  (Optional)
  Items in this Soldering Kit will be provided for use during the class. If you are interested in ordering a kit please click on the image. Kit includes: Butane torch, butane, 1 tube solder paste, fire tweezers, copper tweezers, Sparex, tripod with mesh, flux, soldering board. (Note: kit will be delivered at class. If you require the kit prior to class please contact us to make arrangements.
- Student Files
  Standard size is 2/o. For filing metal. . Instructor will provide to share for every class needed.